Lockformer Vulcan Laser-Max 1.5 Coil Fed Sheet Metal Laser Cutting System

The Lockformer Vulcan Laser-Max 1.5 Coil Fed Sheet Metal Laser Cutting System can be sheet or coil fed to effortlessly cut 0.120″ (3 mm) or 0.135″ (3.5 mm) mild steel (cutting capacity based on laser resonator selected). The cut quality is like that of a high definition plasma cutter on mild steel and stainless steel — with minimal heat affected zone on the laser cut edge, the parts coming off the machine will cause less wear to downstream fabrication equipment. Minimal kerf combined with 4-axis controls enable the cutting of intricate patterns.

Part of the family of Lockformer Vulcan Cutting Systems which also includes:

New call-to-action
New call-to-action

Model

Software / Computer System

Machine Control

Cutting / Plasma Unit

Cutting Capacity

Speed

Cutting Area and Table Capacity

Dimensions / Weight

Lockformer Vulcan Laser-Max 1.5 Coil Fed Sheet Metal Laser Cutting System

Windows 10® Professional PC with 19" Monitor and Printer

Other Cam Software interfaces available upon request

Mach 3 and Color Graphic Industrial Touch Screen

1.5 KW Standard

2.0 KW fiber laser resonator available

0.120" (3 mm) or 0.135" (3.5 mm) mild steel cutting capacity based on laser resonator selected

Positioning speed and max cutting speed are the same at 1,400 ipm (35 m/min) on thinner materials (26 ga or 0.4 mm)

Standard: 5' x 10'

Optional: 5' x 20'

Table Capacity: 350 lbs.

Length: 168"
Width: 96"
Height: 63" (5' x 10' table)
Weight: 3,200 lbs.

Lockformer Vulcan Laser-Max 1.5 Coil Fed Sheet Metal Laser Cutting System


 
Lockformer | Vulcan Laser-Max 1.5 Coil Fed Sheet Metal Laser Cutting System | Testimonial: Joseph Lansdell — President, Poynter Sheet Metal


 
Lockformer | Vulcan Laser-Max 1.5 Coil Fed Sheet Metal Laser Cutting System | Testimonial: Testimonial: Jack Knox — President, R.F. Knox Co., Inc.


 
Lockformer | Vulcan Laser-Max 1.5 Coil Fed Sheet Metal Laser Cutting System | Demonstration



 
Lockformer | Vulcan Laser-Max 1.5 Coil Fed Sheet Metal Laser Cutting System vs. Plasma Machine

Vulcan ROI Calculator

Avg. fittings manually produced per year (layout and cutout only)
Max = 24,000
Avg. annual labor (including benefits) per Fabricator

Manual Cost Per Fitting: $
Vulcan Cost Per Fitting: $ (80% labor efficiency)

Total Labor Savings In Your Shop

man layout: $

Material Savings

Estimated lbs of metal used per year
30% scrap savings over manual layout

Total savings in scrap per year: $

Related Lockformer Products