Lockformer Model 1836 Cleat Bender

The Lockformer Model 1836 Cleat Benders are designed for high-speed folding or bending of drive cleat edges, standing seams, hems, drip edges s-cleats or right angles. With a capacity of 18 gauge or lighter, these presses are available in various configurations to suit your needs:

Model 1836-0: Cleat bender only. Fixed back gauge, preset at 7/16″ or 1/2″ with a bend angle preset at 180˚
Model 1836-1: One (1) position back gauge, preset at 1″ or 5/8″ or 7/16″ with 3 bend angles preset at 180˚, 90˚ and 45˚ (other settings available)
Model 1836-2: Two (2) position back gauge, preset at 1″ and 5/8″ or 7/16″ with 3 bend angles preset at 180˚, 90˚ and 45˚ (other settings available)
Model 1836-3: Three (3) position back gauge, preset at 1″, 5/8″ and 7/16″ with 3 bend angles preset at 180˚, 90˚ and 45˚ (other settings available)

NOTE: this machine was previously branded Lion before it was absorbed by the Lockformer brand

Learn more E

Get a Quote

 Have a Question? Contact us.

Model	Detail	Capacity	Air Consumption	Dimensions / Weight
Model 1836-0	Cleat bender only. Fixed back gauge, preset at 7/16" or 1/2" with a bend angle preset at 180˚	18 gauge or lighter	0.5 CU. ft/cycle @100 PSI	Length: 40" Width: 47" Height: 34" Weight: 1,100 lbs.
Model 1836-1	One (1) position back gauge, preset at 1" or 5/8" or 7/16" with 3 bend angles preset at 180˚, 90˚ and 45˚ (other settings available)
Model 1836-2	Two (2) position back gauge, preset at 1" and 5/8" or 7/16" with 3 bend angles preset at 180˚, 90˚ and 45˚ (other settings available)
Model 1836-3	Three (3) position back gauge, preset at 1", 5/8" and 7/16" with 3 bend angles preset at 180˚, 90˚ and 45˚ (other settings available)