fbpx

Engel 800 Series Roll Formers

The innovative Engel 800 Series Roll Formers are built to last longer, perform quieter, and deliver the highest levels of quality and value to any HVAC fabrication shop. The series features the following three (3) distinct machines to roll form different lock profiles with varying degrees of capacity and additional features:

New call-to-action
New call-to-action

The innovative Engel 800 Series Roll Formers are built to last longer, perform quieter, and deliver the highest levels of quality and value to any HVAC fabrication shop. The series features the following three (3) distinct machines to roll form different lock profiles with varying degrees of capacity and additional features:

Engel 800 Series | Pittsburgh Lock Roll Formers

The Pittsburgh Lock revolutionized the HVAC Industry in the late 1930’s and is still used today for its strength and ease in assembling ductwork. The Engel 800 Series Pittsburgh Lock Roll Formers have eight (8) forming stations with two (2) forming positions. One inboard forming position forms the Pittsburgh lock and one auxiliary or outboard forming position has the capability of forming 1 of 3 different profiles. These machines are also very versatile as the roll tooling can be changed out.

Available with in the following capacities:

  • 20–26 gauge
  • 18–22 gauge
  • 16–20 gauge

 

Engel 800 Series | Button Punch Snap Lock Roll Formers

Engel Button Punch Snap Lock Roll Formers form a two piece seam that greatly simplifies ductwork assembly. The male seam is a button, the female seam is a lock and the two snap together for a flush corner. These machines are available in eight forming station machines. Not only do these locks assemble twice as fast as traditional methods, but because the two pieces nest, they are easier to transport too.

Available with in the following capacities:

  • 24-30 gauge
  • 20–26 gauge
  • 18-24 gauge

 

Engel 800 Series | Slip and Drive Roll Former

  • Standard with extended roll shafts for mounting auxiliary rolls, one side outboard only
  • “S” and drive cleat roll set included inboard
  • No opening rolls required
  • Eight (8) stations, 2″ vertical centers, 5″ horizontal centers and polished 1″ spindles
  • Three motor types are offered:
    • Three (3) hp single phase 220 V for small shops
    • Five (5) hp single phase 220 V for medium shops
    • Five (5) hp three phase 220/460 V for large shops – standard motor
  • Extra large bearings with inner races
  • Hardened steel guides to handle rough plasma cut edges
  • Optional outboard tooling is available on all Engel 800 Series Roll Formers
  • Four (4) sets of tooling can be installed
  • Optional slitter attachment cuts scrap metal to the correct width for producing “S” and drive cleats

Engel 800 Series Roll Formers Specifications

Model

Capacity

Depth of Pocket / Size

Speed

Motor / Voltage

Dimensions / Weight

HB-800P-20

20–26 gauge

5/16" — uses approximately 1" of material

90 feet per minute

5HP, 230/460 volts, 60 cycle, 3 phase, A.C. 1,800 RPM

Other motors available upon request

Length: 60"

Width: 24"

Height: 37"

Passline: 34"

Weight: 950 lbs.

HB-800P-18

18–22 gauge

1/2" — uses approximately 1-3/8" of material

90 feet per minute

5HP, 230/460 volts, 60 cycle, 3 phase, A.C. 1,800 RPM

Other motors available upon request

Length: 60"

Width: 24"

Height: 37"

Passline: 34"

Weight: 950 lbs.

HB-800P-16

16–20 gauge

1/2" — uses approximately 1-3/8" of material

50 feet per minute

5HP, 230/460 volts, 60 cycle, 3 phase, A.C. 1,800 RPM

Other motors available upon request

Length: 60"

Width: 24"

Height: 37"

Passline: 34"

Weight: 950 lbs.

HB-800B-24

24-28 gauge

1/2" — uses approximately 1-13/16" of material

90 feet per minute

5HP, 230/460 volts, 60 cycle, 3 phase, A.C. 1,800 RPM

Other motors available upon request.

Length: 60"

Width: 24"

Height: 37"

Passline: 34"

Weight: 950 lbs.

HB-800B-20

20–26 gauge

1/2" — uses approximately 1-13/16" of material

90 feet per minute

5HP, 230/460 volts, 60 cycle, 3 phase, A.C. 1,800 RPM

Other motors available upon request

Length: 60"

Width: 24"

Height: 37"

Passline: 34"

Weight: 950 lbs.

HB-800B-18

18-24 gauge

1/2" — uses approximately 1-13/16" of material

90 feet per minute

5HP, 230/460 volts, 60 cycle, 3 phase, A.C. 1,800 RPM

Other motors available upon request

Length: 60"

Width: 24"

Height: 37"

Passline: 34"

Weight: 950 lbs.

HB-825

20-26 gauge

1-1/16" for Slip and

1-1/8" for Drive

90 feet per minute

5HP, 230/460 volts, 60 cycle, 3 phase, A.C. 1,800 RPM

Other motors available upon request

Length: 48"

Width: 24"

Height: 42"

Passline: 34"

Weight: 1,000 lbs.

Engel 800 Series Roll Formers